okay, i did it this way: first of all you need a rom to flash your device with, but i guess that should be clear
To put your device into Bootloader Mode you have to press the On/Off Button, the Directional Pad AND the reset button (mostly at the lower left corner) simultaneously.
Release the Reset Button first after about a second, and then the other two Buttons.
Your Device should say "Serial" on its Screen... by that time you can put your Device in the Cradle or connect it via a USB Datacable to your PC.
Also: connect the Cable/Cradle directly to your PC, not to a hub as that could cause Problems during the Flashing Process.
Now you can start the Flash-Program, wait approximately 30 Minutes (if you are just flashing the ROM and nothing else) and follow the Instructions that came with your ROM WORD FOR WORD as these instructions are working for most people.
I'm not saying that flashing is without Problems though... when i flashed my XDA II with WM2005 yesterday, i was not able to send/receive Textmessages (SMS), so i had to reflash the device again with the last ROM released by O2, which sucks. Thank you for your time to read this email.
0 comments:
Post a Comment